標準號：IEC 62091-2007
中文標準名稱：低壓開關設備和控制器.固定消防泵啟動的控制器
英文標準名稱：Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps
標準類型：K31
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：K31
國際標準分類號：29.130.20
適用范圍：This International Standard applies to controllers intended for starting, controlling andstopping stationary fire pumps, including automatic and non-automatic types for alternatingcurrent electric motor or diesel engine-driven fire pumps. It is anticipated that a controller onlycontrols a single driver.Controllers for electric motor-driven fire pumps always include suitable short-circuit protectionas an integral part of the controller. These controllers may include an integral power transferswitch. These controllers are rated 1 000 V a.c. maximum.Controllers for diesel engine-driven fire pumps include electrical circuits that operate variouscontrol and supervisory functions, such as remote control (starting), alarms, signals,indicators, and the proper operation of battery chargers.The most significant purpose of this standard is to characterize the unique features of firepump controllers. A further purpose is to prescribe a procedure for exercising the controllersto verify that the unique features are operative. For the purpose of this standard, thisprocedure is described as the “fire pump controller test protocol”.The requirements of this standard apply neither to the method nor to the means by which theelectrical energy is generated. In addition, they do not apply to the installation between theorigin of the installation and the fire pump controller, which are to be found in the IEC 60364series. This standard does not apply to diesel engine-driven electric generators which may beassociated with a stationary fire pump installation.