標準號：DIN EN 682-2006
中文標準名稱：彈性體密封件.輸送氣體和烴類液體的管道和配件用密封件的材料要求
英文標準名稱：Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids (includes Amendment A1:2005); English version of DIN EN 682:2006-10
標準類型：J22
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J22
國際標準分類號：23.040.80
引用標準：ISO 37;ISO 48;ISO 188-1998;ISO 471;ISO 815
適用范圍：This European Standard specifies requirements for elastomeric materials used in seals for supply pipes and fittings, ancillaries and valves at operating temperatures in general from -5 °C up to 50 °C and in special cases from -15 °C up to 50 °C, for the following:General applications (see Table 4, type G)a) gaseous fuel (manufactured, natural and liquefied petroleum gas [LPG] in gaseous phase);b) hydrocarbon fluids with aromatic content up to 30 % (V/V), including LPG in liquid phase. Special applications (see Table 4, type H)Materials suitable for carrying gaseous fuels containing gas condensates and hydrocarbon fluids of unrestricted aromatic content.General requirements for finished joint seals are also given; any additional requirements called for by the particular application are specified in the relevant product standards taking into account that the performance of pipe joints is a function of the seal material properties, seal geometry and pipe joint design. This European Standard should be used where appropriate with product standards which specify performance requirements for joints.This European Standard is applicable to joint seals for all pipeline materials including iron, steel, copper andplastics.In the case of composite seals requirements in 4.2.8 and 4.2.9 apply only when the materials used for any elastomeric parts come into contact with gaseous fuel or hydrocarbon fluid.Elongation at break, tensile strength, compression set and stress relaxation requirements for materials of hardness categories 80 and 90 apply only when they constitute that part of the seal which participates directly in the sealing function or in long term stability.This standard is not applicable to the following:a) seals made from cellular materials;b) seals with enclosed voids as part of their design;c) seals with requirements of resistance to flame or to thermal stress;d) seals which contain splices joining pre-vulcanized profile ends.