標準號：SAE AMS 4128D-2007
中文標準名稱：1.0Mg 0.60Si 0.30Cu 0.20Cr(6061-T451)溶解熱處理和通過拉伸消除應力的軋制或冷精整的鋁合金棒材
英文標準名稱：Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching UNS A96061
標準類型：V11
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V11
國際標準分類號：49.025.20
引用標準：ANSI H 35.2-2006;ANSI H 35.2M-2006;ASTM B 660-2002;ASTM B 666/B 666M-2001;SAE AMS 2350BA-1989;SAE AMS 2355H-2005;SAE AMS 2772-1997;SAE AS 1990-1990
適用范圍：This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.50mm) and over in nominal diameter or least difference between parallel sides. These bars have been used typically for parts where moderate ductility, formability, and response to precipitation heat treatment are required and where distortion during machining must be minimized, but usage is not limited to such applications.