標準號：BS EN 14399-4-2005
中文標準名稱：預負載用高強度結構螺栓連接組件.HV系統.六角形螺栓和螺栓螺母
英文標準名稱：High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies
標準類型：J13
發布日期：2005/10/24 12:00:00
實施日期：2005/10/24 12:00:00
中國標準分類號：J13
國際標準分類號：21.060.01;21.060.10;21.060.20
引用標準：EN 10045-1;EN 14399-1;EN 14399-2;EN 14399-5;EN 14399-6
適用范圍：This document specifies together with EN 14399-1 the requirements for assemblies of high-strength structural boltsand nuts of system HV suitable for preloaded joints with large widths across flats, thread sizes M 12 to M 36 andproperty classes 10.9/10.Bolt and nut assemblies to this document have been designed to allow preloading of at least 0,7 fub×As 1) accordingto ENV 1993-1-1 (Eurocode 3) and to obtain ductility predominantly by plastic deformation of the engaged threads.For this purpose the components have the following characteristics:? nut height approximately 0,8 d? bolt with short thread lengthBolt and nut assemblies according to this document include washers according to EN 14399-6 or to EN 14399-5 (underthe nut only).NOTE Attention is drawn to the importance of ensuring that the bolts are correctly used if satisfactory result are to beobtained. For recommendations concerning proper application, reference to ENV 1090-1 is made.The test method for suitability for preloading is specified in EN 14399-2.Clamp lengths for the bolt/nut/washer assemblies are given in the normative Annex A.