標準號：BS EN 1726-2-2000
中文標準名稱：工業貨車的安全.荷載能力至10000Kg的自行貨車和拉桿拉力至20000N的工業牽引車.帶高架駕駛位的貨車和專為超負荷運行設計的貨車的附加要求
英文標準名稱：Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. Additional requirements for trucks with elevating operator position and trucks specifically
標準類型：T09
發布日期：2000/11/15 12:00:00
實施日期：2000/11/15 12:00:00
中國標準分類號：T09
國際標準分類號：53.060
適用范圍：1 This European Standard is applicable, in addition to EN 1726-1 to industrial trucks designed to travel indoors on smooth level prepared surfaces and equipped with vertical, non tilting mast. a) with an elevating operator position, as defined in 3.1.3.1.6 and 3.1.3.3 of ISO 5053, where the elevating operator position and the load handling device lifts simultaneously to a height of more than 1 200 mm above ground level and b) with a load handling device elevated more than 1 200 mm as defined in 3.1.3.1.10 of ISO 5053 For both types of truck the load handling device can be elevated, lowered or horizontally displaced, laden or unladen, while the truck is travelling. Trucks can be used in guidance systems, without guidance systems or in both systems, and are not intended to tow or push. 2 This European Standard covers the technical requirements necessary to minimise the specific hazards listed in clause 4 which could occur during normal operation and maintenance (in accordance with the data given by the manufacturer or his authorised representative) of industrial trucks. This European Standard does not cover those requirements to minimise hazards which may occur: - during construction - when handling suspended loads which may swing freely - when using trucks on public roads - when using a work platform fitted to a truck not specifically designed to elevate persons - when using trucks see 1.1 with tiltable mast. This European Standard does not repeat all technical rules which are state of the art and which are applicable to the material used to construct the industrial truck. Reference should be made to EN 292-2. 3 This European Standard applies to industrial trucks equipped with load handling devices for normal industrial duties, e.g. fork arms and platforms, or attachments for specified applications. Fork arms, load platforms and integrated attachments are considered to be parts of the industrial truck. Attachments mounted on the load carrier or on the fork arms which are removable by the user are not considered to be part of the industrial truck. For attachments the appropriate clauses of this standard are applicable. 4 Where industrial trucks are required to operate in severe conditions (e.g. in extreme climates, in freezer applications, strong magnetic fields) special precautions may be necessary. These are not covered by this standard. 5 For trucks with elevating operator position up to and including 1 200 mm and/or trucks especially designed to travel with elevated load up to and including 1 200 mm the requirements of EN 1726-1 apply.