標準號：BS EN 13128-2001+A2-2009
中文標準名稱：機床安全性.銑床(包括鏜床)
英文標準名稱：Safety of machine tools - Milling machines (including boring machines)
標準類型：J54
發布日期：2001/6/15 12:00:00
實施日期：2001/6/15 12:00:00
中國標準分類號：J54
國際標準分類號：25.080.20
適用范圍：1.1 This standard specifies the technical safety requirements and measures to be adopted by personsundertaking the design, construction and supply (including installation and dismantling, with arrangements fortransport and maintenance) of milling machines (see 3.1) including machines capable of performing boringoperations (see 3.5).Machines covered by this standard include but are not limited to:? knee and column type milling machines (see figures C.1, C.2);? bed–type milling machines (see figure C.3);? multi–spindle milling machines (see figures C.4 and C.5);? plano–milling machines (see figures C.4 and C.5);? profile and contouring milling machines (see figure C.6),? milling and boring machines (see figure C.7).1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance,cleaning, and setting operations. It presumes access to the machine from all directions. It describes meansto reduce risks to operators and other exposed persons.1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine.1.4 This standard deals with significant hazards relevant to milling machines when they are used asintended and under the conditions foreseen by the manufacturer (see clause 4).1.5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laserprocessing) are covered by other standards (see Bibliography).1.6 Milling machines with automatic tool changing capabilities are not covered by this standard (seeprEN 12417:1996).1.7 This standard is not applicable to milling machines which were manufactured before the date ofpublication by CEN of this standard.