欧洲处破女www人鲁,亚洲无玛,国产bbaaaaa片,三年片在线观看免费播放大全电影国语版

百檢網首頁 我的訂單 400-101-7153

ISO 12894-2001 熱環境的人類工效學 對暴露在極熱或極冷環境的人的醫療監督

作者:百檢網 時間:2021-07-16

標準號:ISO 12894-2001
中文標準名稱:熱環境的人類工效學 對暴露在*熱或*冷環境的人的醫療監督
英文標準名稱:Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments
標準類型:A25
發布日期:1999/12/31 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:A25
國際標準分類號:13.040.20;13.180
適用范圍:This International Standard provides advice to those concerned with the safety of human exposures to extreme hot or cold thermal environments. Extreme thermal environments are those which result in a high rate of heat gain or loss by the body. A precise definition of such environments cannot easily be given, as the change in body heat storage depends on clothing and activity as well as the parameters of the climatic environment. As a guide, the boundaries of extreme environments might be considered to be as follows: for hot environments, a wet bulb globe temperature of 25℃; for cold environments an air temperature of 0℃ or below. Extreme environments can only be tolerated for limited periods of time before a risk of ill health results. Control measures are necessary to ensure the safety of those so exposed, one of which is the provision of appropriate medical supervision prior to and during exposures. This International Standard is intended to assist those with responsibility for such exposures to reach decisions about the appropriate level of medical supervision in different situations. This International Standard should be read and used in the context of other relevant guidance and legislation. This guidance is applicable to laboratory and occupational exposures to extreme environments. In either case an assessment should be made of the expected thermal stress on the individual, but the detailed arrangements for medical supervision will differ. Control of occupational exposures must also satisfy national health and safety legislation. The laboratory or climatic chamber studies for which this International Standard will be relevant include those in which people may be exposed to high or low ambient conditions or local heating or cooling. Studies may, for example, investigate physiological or psychophysical responses to the environment or the benefit of clothing or other protective equipment. Scientific investigations and demonstrations for teaching purposes are included in the scope. In some countries, such studies are subject to specific legislation and, in all cases, experimental exposures should be conducted in the context of accepted ethical criteria as detailed in relevant national and international statements (see informative annex A and the bibliography). Extremes of environment may be only one component of the total physiological stress imposed in a study. In such cases, appropriate advice must also be obtained with regard to any medical supervision required prior to exposure to the other stressors involved, for example whole body vibration. In some cases, ergonomic investigations are conducted in the field, for example, to document the physiological stress of particular occupations. If the overall stress of the task is increased as a result of the proposed study, this International Standard will be relevant. This International Standard does not apply to the use of hypo or hyper thermia in the course of medical investigation or treatment.

相關標準

《ISO 17226-1:2008》皮革 甲醛含量的化學測定 第1部分:高效液相色譜法 ISO 17226-1:2008
《GB/T 18412.7-2006》紡織品 農藥殘留量的測定 第7部分:毒殺芬 GB/T 18412.7-2006
《GB/T 23322-2009》紡織品 表面活性劑的測定 烷基酚聚氧乙烯醚 GB/T 23322-2009
《DIN 54231-2005》紡織品-分散性染料的測定 DIN 54231-2005
《GB/T 11170—2008》不銹鋼 多元素含量的測定 火花放電原子發射光譜法(常規法) GB/T 11170—2008
《GB/T 4336—2016》碳素鋼和中低合金鋼 多元素含量的測定 火花放電原子發射光譜法(常規法) GB/T 4336—2016
《ASTM E562-2019》用系統人工點計數法測定體積分數的試驗方法 ASTM E562-2019
《GB/T 709—2019》熱軋鋼板和鋼帶的尺寸、外形、重量及允許偏差 GB/T 709—2019
《ASTM G28-2002(2015)》檢測鍛制高鎳鉻軸承合金晶間腐蝕敏感性試驗方法 ASTM G28-2002(2015)
《GB/T 7216—2009》灰鑄鐵金相檢驗 GB/T 7216—2009
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。

百檢能給您帶來哪些改變?

1、檢測行業全覆蓋,滿足不同的檢測;

2、實驗室全覆蓋,就近分配本地化檢測;

3、工程師一對一服務,讓檢測更精準;

4、免費初檢,初檢不收取檢測費用;

5、自助下單 快遞免費上門取樣;

6、周期短,費用低,服務周到;

7、擁有CMA、CNAS、CAL等權威資質;

8、檢測報告權威有效、中國通用;

客戶案例展示

  • 上海朗波王服飾有限公司
  • 浙江圣達生物藥業股份有限公司
  • 天津市長慶電子科技有限公司
  • 桑德斯微電子器件(南京)有限公司
  • 上海嘉疊貿易有限公司
  • 上海紐特絲紡織品有限公司
  • 無錫露米婭紡織有限公司
  • 東方電氣風電(涼山)有限公司
  • 寧波圖米文具用品有限公司
  • 江蘇力之創特種裝備制造有限公司

相關資訊

暫無相關資訊

最新資訊

百檢網
主站蜘蛛池模板: 静海县| 南汇区| 林芝县| 久治县| 宁陕县| 开化县| 林口县| 雷波县| 修水县| 灵川县| 盱眙县| 榕江县| 宾川县| 祁连县| 北宁市| 垣曲县| 满洲里市| 黄浦区| 自治县| 济宁市| 秭归县| 来宾市| 揭西县| 恩施市| 新沂市| 铜川市| 普定县| 梅州市| 荥阳市| 同江市| 思南县| 盖州市| 蓬溪县| 上饶市| 文安县| 玉树县| 嘉定区| 垫江县| 囊谦县| 河曲县| 甘洛县|