標準號：ISO 4190-2-2001
中文標準名稱：電梯(美國:電梯)安裝.第2部分:IV類電梯
英文標準名稱：Lift (US: Elevator) installation - Part 2: Class IV lifts
標準類型：Q78
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Q78
國際標準分類號：91.140.90
適用范圍：This part of ISO 4190 specifies the necessary dimensions to permit the installation of Class IV lifts, as defined in 3.2.4, generally used for the transport of goods (freight). It deals with electric and hydraulic lifts. The horizontal dimensions of the wells (US: hoistways) are generally defined by the entrance and drive configurations. It covers lifts with either horizontal or vertical power-operated sliding doors [see Figures 1 a) and 1 b)]. For other characteristics, the manufacturers should be consulted. This part of ISO 4190 is applicable to new lift installations, with a car with one or two entrances, to be installed in a new building. Where relevant, it may be used as a basis for an installation in an existing building. Two types of loading (load per unit area) are addressed: Series A: passenger and goods (freight) lifts with loading conforming to EN 81-1 or EN 81-2; Series B: lifts for goods (freight) only, which have a different floor loading in countries which allow this by virtue of their safety codes.