標準號：ISO 11843-2-2000
中文標準名稱：檢測能力 第2部分:線性校準方法
英文標準名稱：Capability of detection - Part 2: Methodology in the linear calibration case
標準類型：A00
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：A00
國際標準分類號：17.020
適用范圍：This part of ISO 11843 specifies basic methods to: — design experiments for the estimation of the critical value of the net state variable, the critical value of the response variable and the minimum detectable value of the net state variable, — estimate these characteristics from experimental data for the cases in which the calibration function is linear and the standard deviation is either constant or linearly related to the net state variable. The methods described in this part of ISO 11843 are applicable to various situations such as checking the existence of a certain substance in a material, the emission of energy from samples or plants, or the geometric change in static systems under distortion. Critical values can be derived from an actual measurement series so as to assess the unknown states of systems included in the series, whereas the minimum detectable value of the net state variable as a characteristic of the measurement method serves for the selection of appropriate measurement processes. In order to characterize a measurement process, a laboratory or the measurement method, the minimum detectable value can be stated if appropriate data are available for each relevant level, i.e. a measurement series, a measurement process, a laboratory or a measurement method. The minimum detectable values may be different for a measurement series, a measurement process, a laboratory or the measurement method. ISO 11843 is applicable to quantities measured on scales that are fundamentally continuous. It is applicable to measurement processes and types of measurement equipment where the functional relationship between the expected value of the response variable and the value of the state variable is described by a calibration function. If the response variable or the state variable is a vectorial quantity the methods of ISO 11843 are applicable separately to the components of the vectors or functions of the components.