標準號:BS EN 804-1995
中文標準名稱:塑料管道系統.壓力管道溶劑膠粘接頭的注射模塑承口連接管件.短期內部液壓壓力的試驗方法
英文標準名稱:Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure
標準類型:G33;P94
發布日期:1995/7/15 12:00:00
實施日期:1995/7/15 12:00:00
中國標準分類號:G33;P94
國際標準分類號:23.040.45
適用范圍:This standard specifies a method for testing the resistance to internal hydrostatic pressure at 20 ℃ of injection-moulded thermoplastics fittings for connecting, by means of solvent cementing, to pressure pipes of the same type of material, having a nominal diameter, dn, less than or equal to 315 mm.
This method is intended for testing fittings over a period of the order of 1 h to 10 h at a pressure which is material-dependent and typically several times higher than the nominal pressure of the fitting.
相關標準
《HY/T 063-2002》《管式陶瓷微孔濾膜元件》 HY/T 063-2002 6.1
《HY/T 064-2002》《管式陶瓷微孔濾膜測試方法》 HY/T 064-2002 7.1.1
《HY/T 063-2002》《管式陶瓷微孔濾膜元件》 HY/T 063-2002 6.3
《HY/T 064-2002》《管式陶瓷微孔濾膜測試方法》 HY/T 064-2002 7.1.2
《HY/T 064-2002》《管式陶瓷微孔濾膜測試方法》 HY/T 064-2002 7.2
《GB/T 15558.1-
2015》燃氣用埋地聚乙烯(PE)管道系統 第1 部分 管材 GB/T 15558.1-
2015 6.2.9
《GB/T 21238-2016》玻璃纖維增強塑料夾砂管 GB/T 21238-2016 7.1
《GB/T 21238-2016》玻璃纖維增強塑料夾砂管 GB/T 21238-2016 7.2
《CJ/T 120-2016》給水涂塑復合鋼管 CJ/T 120-2016 7.8
《CJ/T 120-2016》給水涂塑復合鋼管 CJ/T 120-2016 7.7
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;