標準號：ISO 14922-4-1999
中文標準名稱：熱噴涂 熱噴涂結構的質量要求 第4部分:基本質量要求
英文標準名稱：Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements
標準類型：A29
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：A29
國際標準分類號：25.220.20
適用范圍：This standard specifies requirements so that: - It is independent of the type of the thermally sprayed structure. - It defines quality requirements for thermal spraying both in workshops and on site. - It provides guidance for describing a manufacturer's capability to produce thermally sprayed constructions to meet specified requirements. - It may also be used as a basis for assessing the manufacturer in respect to his thermal spraying capability. This standard is appropriate when demonstration of a manufacturer's capability to produce thermally sprayed construction, fulfilling specified quality requirements, are specified in one or more of the following: - a contract between involved parties; - an application standard; - a regulatory requirement. The requirements contained within this standard may be adopted in full or may be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of thermal spraying in the following cases: - Case 1 To provide specific requirements for thermal spraying in contracts which require the manufacturer to have a quality system other than EN ISO 9001 or EN ISO 9002. - Case 2 To provide specific requirements for thermal spraying in contracts which require the manufacturer developing a quality system. - Case 3 To provide specific requirements for thermal spraying in application standards which uses thermal spraying as part of its requirements or in a contract between relevant parties.