標準號：BS EN ISO 9773-1999
中文標準名稱：塑料.與小火焰源接觸的薄型垂直軟樣件的燃燒性能測定
英文標準名稱：Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
標準類型：G31
發布日期：1999/3/15 12:00:00
實施日期：1999/3/15 12:00:00
中國標準分類號：G31
國際標準分類號：13.220.40;83.080.01
適用范圍：1 This International Standard specifies a small- scale laboratory screening procedure for comparing the relative burning behaviour of vertically oriented thin and relatively flexible plastics specimens exposed to a low-energy-level flame ignition source. These specimens cannot be tested using method B of ISO 1210 since they distort or shrink away from the applied flame source without igniting. 2 This method of test determines the afterflame and afterglow times of specimens. 3 The classification system described in annex A is intended for quality control and the preselection of component materials for products. The classification established by this method of test is applicable only to the material used for the specimens. NOTE 1 - Test results are influenced by material components, e.g. pigments, fillers, fire-retardant concentrations.