標準號：IEC 61097-8-1998
中文標準名稱：全球海上遇險和安全系統(tǒng)(GMDSS) 第8部分:海上中頻、中高頻和甚高頻頻帶中數(shù)字選擇呼叫(DSC)的船用監(jiān)控接收設備 操作和性能要求、測試方法和要求的測試結果
英文標準名稱：Global maritime distress and safety system (GMDSS) - Part 8: Shipborne watchkeeping receivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHF bands - Operational and performance requirements, methods of testing and r
標準類型：U27
發(fā)布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：U27
國際標準分類號：47.020.70
適用范圍：This part of IEC 61097 specifies the minimum requirements for shipborne receivers intended to be connected to an external installation, including a decoder for digital selective calling (DSC), and used as receivers for watchkeeping on DSC channels on board ships operating in the maritime mobile MF, MF/HF and VHF bands allocated in the Radio Regulations of the International Telecommunication Union (ITU) to the maritime mobile service, both in connection with distress and safety communication and in connection with general communication. These requirements include the relevant provisions of the Radio Regulations and recommenda-tions ITU-R M.489, and ITU-R M.541, and relevant provisions of resolutions A.694, A.803, A.804 and A.806 of the International Maritime Organization (IMO). This standard also specifies technical characteristics, methods of testing and required test results for dedicated watchkeeping receivers for use with radio installations in the GMDSS as required by chapter IV of the International Convention for Safety of Life at Sea (SOLAS) 1974, as amended, and with which IEC 60945 is associated. When a requirement in this standard differs from IEC 60945, the requirement of this standard takes precedence. This standard covers receivers with analogue or with digital DSC signal output interfaces or with both. DSC watchkeeping receivers can be either fixed frequency receivers or, in MF/HF bands, scanning receivers. They may be a separate equipment or be integrated with a DSC or radiotelephone equipment. For integrated equipment this standard specifies the requirements and methods of testing of the DSC watchkeeping receivers only. The DSC equipment or radiotelephone shall comply with the requirements of the relevant standard, for example, IEC 61097-3 [3]