標準號：SIS SS-ISO 2177-1986
中文標準名稱：金屬涂層．涂層厚度測量．通過陽*溶解作用的庫侖法
英文標準名稱：Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
發布日期：1986/6/25 12:00:00
實施日期：1999/12/31 12:00:00
適用范圍：This International Standard specifies a coulometric method by anodic dissolution for measuring the thickness of metallic coatings.Typical combinations of coatings and substrates that can be tested by this method are given in table 1. Other combinations may be tested with electrolytes in current use (see annex B), or new electrolytes may be developed for them, but, in both cases, it is necessary to verify the suitability of the complete system.The method is also applicable to multi-layer systems, for example Cu/Ni/Cr (see also 8.6).This method may be used to measure the thickness of coatings applied by various means, if due account is taken of special features, such as the presence of an alloy layer. In some cases, the presence and thickness of diffusion layers can also be measured. It can also be used to measure the thickness of coatings on cylindrical specimens and wires (see 8.8).