標準號：BS EN ISO 60-2000
中文標準名稱：塑料.可由專用漏斗注入的材料的表觀密度測定
英文標準名稱：Plastics - Determination of apparent density of material that can be poured from a specified funnel
標準類型：G31
發布日期：1978/3/31 12:00:00
實施日期：1978/3/31 12:00:00
中國標準分類號：G31
國際標準分類號：83.080.01
適用范圍：1 This International Standard specifies two empirical methods for the quantitative determination of the loss of mass from a plastic material under defined conditions of time and temperature, in the presence of activated carbon. 2 These methods are used, in particular, for the quantitative determination of the loss on heating of plasticizers from plasticized plastic materials in which case it is generally assumed that no significant amounts of other volatile materials are present. 3 These are empirical test methods, only suitable for a rather rapid comparison of the losses of plasticizers or, in general, of volatile compounds, from different plastics. 4 They may also be employed for the comparison of different types of plasticizers; in this case standard compounds should be prepared, on the basis of a well characterized resin, with known ratios of resin to plasticizer. NOTE —These comparisons are possible only if the test specimens are of the same thickness. If it can be assumed that, after recon-ditioning, the moisture content of the exposed specimens is equal to that obtaining after the original conditioning, the effect of moisture may be ignored. 5 Two methods are specified : Method A : the test specimens are in direct contact with the carbon; this method is particularly useful for materials which have to be tested at relatively low temperatures because they flow at higher temperatures. Method B : the test specimens are placed in wire cages which prevent direct contact between the test specimens and the carbon.