標準號：BS EN ISO 4518-1980
中文標準名稱：金屬覆層.覆層厚度的測量.輪廓儀法
英文標準名稱：Metallic coatings - Measurement of coating thickness - Profilometric method
標準類型：A29
發(fā)布日期：1980/12/31 12:00:00
實施日期：1980/12/31 12:00:00
中國標準分類號：A29
國際標準分類號：17.040.20
適用范圍：1 This International Standard specifies a method for the measurement of metal coating thickness by first forming a step between the surface of the coating and the surface of its substrate and then measuring the step height using a profile recording instrument. It covers the instrumentation characteristics and the procedure appropriate to this specific application of profilometric methods. 2 The method is applicable to the measurement of thicknesses of metal coatings from 0,01 μm to 1 000 μm on flat surfaces and, if appropriate precautions are taken, on cylin-drical surfaces. It is highly suitable for the measurement of minute thicknesses but, for thicknesses of less than 0,01 μm, surface flatness and surface smoothness are very critical and accordingly, the method is not recommended for use down to the lowest level of measurement usual for electronic stylus in-struments. The method is suitable for measuring coating thicknesses when preparing coating thickness reference stan-dards.