標準號：ANSI/ASTM D4203-2000
中文標準名稱：苯乙烯丙烯氰注射和擠壓材料規范
英文標準名稱：Specification for Styrene Acrylonitrile (SAN) Injection and Extrusion Materials (08.02)
標準類型：G32
發布日期：1999/12/31 12:00:00
實施日期：2000/9/12 12:00:00
中國標準分類號：G32
國際標準分類號：83.080.20
適用范圍：This specification covers unfilled, filled, and reinforced styrene acrylonitrile (SAN) materials suitable for injection molding and extrusion. This specification is not intended for the selection of materials, but only as a means of calling out materials to be used in the manufacture of parts. Materials are to be selected by personnel with expertise in the plastics field where the economics, the environment to be encountered, the inherent properties of the materials, the part design, the part performance required, and the manufacturing process to be employed all enter into the selection. The properties included in this specification are those required to identify the compositions covered. There may be other requirements necessary to identify particular characteristics important to specialized applications. These will be agreed upon between the user and the supplier, by using the suffixes specified in Section 7. The values stated in SI units are to be regarded as the standard. The values in parentheses are given for information only (see IEEE/ASTM SI 10.) The following precautionary caveat pertains only to the test methods portion, Section 15, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1Although this specification and ISO 4894/1 differ in approach or detail, data obtained using either are technically equivalent.