標準號：DIN ISO 20816-4-2018
中文標準名稱：機械振動. 機械振動的測量和評估. 第4部分: 帶有流體膜軸承的超過3MW的燃?xì)廨啓C(jī)(ISO 20816-4-2018)
英文標準名稱：Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings (ISO 20816-4:2018)
標準類型：Z32
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Z32
國際標準分類號：17.160;27.040
引用標準：DIN ISO 2954-2012;DIN ISO 5348-1999;DIN ISO 7919-3-2018;DIN ISO 10816-3-2018;DIN ISO 10816-7-2009;DIN ISO 10816-8-2014;DIN ISO 10816-8/A1-2017;DIN ISO 10817-1-1999;DIN ISO 13373-1-2002;DIN ISO 13373-2-2016;DIN ISO 13373-3-2015;DIN ISO 20816-1-2017;DIN ISO
適用范圍：The document provides specific guidance for assessing the severity of vibration measured on both the bearing housings and the shafts of gas turbines in situ. The criteria provided in this document apply to land-based gas turbines with power outputs greater than 3 MW and a normal operating speed of 3000 r/min to 30000 r/min. This part of ISO 20816 provides specific guidance for evaluating the severity of in-situ, broad-band vibration measured radial (i.e. transverse) to the shaft axis on all main bearing housings or pedestals or on the shaft and in the axial direction on thrust bearings. Two criteria are provided for assessing the machine vibration when operating under steady state conditions. One criterion considers the magnitude of the observed vibration; the second considers changes in the magnitude. In addition, different criteria are provided for transient operating conditions, such as run-up and coast-down.