標準號：DIN EN 1366-11-2018
中文標準名稱：服務設施的防火試驗.第11部分:電纜系統及其相關部件的防火系統;德文版本EN 1366-11-2018
英文標準名稱：Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components; German version EN 1366-11:2018
標準類型：C80
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：C80
國際標準分類號：13.220.50;29.060.20;91.140.50
引用標準：EN 1363-1-2012;EN 1363-2-1999;EN 13501-3+A1-2009;EN 50200-2015;EN 50288-1-2013;EN 50288-7-2005;EN 50289-1-4-2001;EN 50289-1-5-2001;EN 50289-1-8-2017;EN 50289-1-11-2016;EN 50289-4-16-2016;EN 50363-0-2011;EN 50363-1-2005;EN 50363-2-1-2005;EN 50363-2-1/A1-20
適用范圍：This European Standard describes the method to evaluate the performance of protective systems for electrical cable and busbar systems in order to maintain the circuit integrity under fire conditions to classify the protective system according to EN 13501-3 for the P classification. The test examines the behaviour of cable protection systems exposed to fire from outside. The tests specified in this standard are not aimed for assessing the performance of the fire protective system and the penetration seal for maintaining the requirements of the penetrated wall or ceiling (classification E / I). This method is very different to EN 50200 for the PH classification and also to IEC 60331-11, IEC 60331-21, IEC 60331-23, and IEC 60331-25, which are not designed for fire protective systems for electrical cable systems. This standard should be used in conjunction with EN 1363-1. The test results apply to fire protective systems for electrical cable systems rated for voltages up to 1 kV. The test procedure should also be used to determine the performance of protective systems for use with data and optical cables, however, verification procedures for such cables are still under development. Proposals are given in Annex C. The protective system may include ventilation devices, inspection hatches, fixed or removable lids etc. The tests specified in this standard are not aimed for assessing the performance of sprayed or painted coatings (e. g. intumescent or ablative coating, plastic film, epoxy resin) and similar protective layers (e. g. wrap, bandage) applied directly on the cables or bus bars as fire protective system. Also, cables and bus bars with intrinsic resistance to fire, and without fire protective systems around, are excluded (see CENELEC standard EN 50577). This test method is not applicable for cabinets for electrical accessory containing bus systems, relays or similar.