標準號：IEC 61010-2-091-2012
中文標準名稱：測量、控制和實驗室用電氣設備的安全性要求.第2-091部分:柜式X射線系統詳細要求
英文標準名稱：Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems
標準類型：N61
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：N61
國際標準分類號：19.080;71.040.10;71.040.50
引用標準：IEC 62061;ISO 13849-1
適用范圍：This clause of Part 1 is applicable, except as follows:1.1.1 Equipment included in scopeReplacement:Replace the text with the following:This part of IEC 61010 specifies particular safety requirements for CABINET X-RAY SYSTEMS.A CABINET X-RAY SYSTEM is a system that contains an X-ray tube installed in a cabinet which, independently of existing architectural structures except the floor on which it may be placed, is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from the interior during generation of X-radiation.These CABINET X-RAY SYSTEMS are used in industrial, commercial, and public environments, for example, to inspect materials, to analyze materials, and to screen baggage.1.1.2 Equipment excluded from scopeAddition:Add the following new items to the list:aa) equipment intended to apply X-radiation to humans or animals;bb) equipment incorporating an X-ray tube but not incorporating complete shieldingagainst X-radiation hazards, such as:1) equipment intended to be used within a shielded room which excludes personnel during operation;2) equipment intended to be used with separate portable or temporary shielding;3) equipment intended to produce an emerging beam of X-radiation.1.2.1 Aspects included in scopeAddition:Add the following text at the end of the first paragraph:This part of IEC 61010 specifies requirements for the design and methods of construction of CABINET X-RAY SYSTEMS to provide adequate protection for OPERATORS, bystanders, trainedservice personnel, and the surrounding area against unintentionally-emitted X-radiation and from mechanical HAZARDS related to their conveyors.