標準號：SAE AMS 4163E-2012
中文標準名稱：固溶處理并通過拉伸和矯正消除應力的6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T3511)鋁合金擠壓件
英文標準名稱：Aluminum Alloy, Extrusions 6.3Cu 0.30Mn 0.18Zr 0.10V 0.06Ti (2219-T3511) Solution Heat Treated and Stress-Relieved by Stretching, and Straightened
標準類型：V11
發布日期：2012/2/15 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V11
國際標準分類號：49.025.20
引用標準：ANSI H 35.2-2009;ANSI H 35.2M-2009;ASTM B 594-2009;ASTM B 660-2008;ASTM B 666/B 666M-2008;ASTM G 47-1998;SAE AMS 2355;SAE AMS 2772-1997;SAE ARP 823;SAE AS 1990-1990
適用范圍：This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing. These extrusions have been used typically for structural parts requiring high strength up to 500 °F (260 °C) after proper precipitation heat treatment, but usage is not limited to such applications and which may require welding during fabrication. Certain design and fabricating procedures may cause material in the specified condition to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.