標準號：SAE AMS 6345C-2011
中文標準名稱：含0.95Cr 0.20Mo (0.28-0.33C)(SAE 4130)的標準和其它熱處理鋼薄板,帶和板材
英文標準名稱：Steel, Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated
標準類型：V11
發布日期：2011/11/23 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V11
國際標準分類號：49.025.10
引用標準：ASTM A 370-2011;ASTM E 112-2010;ASTM E 290-2009;ASTM E 350-1995;ASTM E 384-2011;SAE AMS 2252;SAE AMS 2259;SAE AMS 2301K-2010;SAE AMS 2370;SAE AMS 2807-1991
適用范圍：This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate. These products have been used typically where welding and moderate tensile properties are required, but usage is not limited to such applications. Sheet and strip are extensively used where minimum tensile strength of 180 ksi (1241 MPa) is required in sections up to 0.125 inch (3.18 mm) in nominal thickness and proportionately lower strength is required in heavier thicknesses.