標準號：SAE J 2337/1-2014
中文標準名稱：有ISO 261標準螺紋和O形密封圈的流體動力和高壓用端口,螺桿端和堵頭的連接.第1部分:有槽錐形座端口的要求,尺寸規格,設計和試驗方法
英文標準名稱：Connections for Fluid Power and High Pressure Use-Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing-Part 1: Ports with Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods
標準類型：T32
發布日期：2014/6/5 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：T32
國際標準分類號：23.040.01
引用標準：ASME B46.1-2009;ASTM B 117-2011;ASTM B 633-2013;ISO 261-1998;ISO 1302-2002;ISO 3448-1992;ISO 4759-1-2000;ISO 5598-2008;ISO 19879-2010;SAE J 515-2010;SAE J 2337/2-2012;SAE J 2337/3-2012
適用范圍：This part of SAE J2337 specifies dimensions, design, and performance requirements for eight ports using a conical seal to insure leak proof performance with a design factor of 4 to 1. Field of Application These connectors are intended for general and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These connectors are capable of providing leak proof full flow connections in hydraulic systems operating from 95 kPa vacuum to the working pressures shown in Table 1. Since many factors influence the pressure at which hydraulic systems will or will