標準號：SAE AMS 6351J-2011
中文標準名稱：球化處理過的含0.95Cr和0.20Mo(0.28 0.33 C)的鋼片,鋼帶和鋼板(SAE 4130)
英文標準名稱：Steel, Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28 0.33C) (SAE 4130) Spheroidized
標準類型：V11
發布日期：2011/10/5 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V11
國際標準分類號：49.025.10
引用標準：ASTM A 370-2011;ASTM E 112-2010;ASTM E 290-2009;ASTM E 350-1995;ASTM E 384-2011;SAE AMS 2252;SAE AMS 2259;SAE AMS 2301K-2010;SAE AMS 2370;SAE AMS 2807-1991
適用范圍：This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate, These products have been used typically for general use where deep drawing and forming are required, but usage is not limited to such applications. Product may be through-hardened to a minimum tensile strength of 180 ksi (1241 MPa) in sections 0.125 inch (3.18 mm) and under in nominal thickness and proportionately lower strength in heavier section thicknesses.