標準號：BS EN 2825-2011
中文標準名稱：航空航天系列.輻射熱和火焰影響下的非金屬材料燃燒行為.煙濃度的測定
英文標準名稱：Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density
標準類型：V13;C80
發布日期：2011/5/31 12:00:00
實施日期：2011/5/31 12:00:00
中國標準分類號：V13;C80
國際標準分類號：13.220.40;49.025.99
引用標準：EN 2824;EN ISO 13943-2008
適用范圍：This European Standard defines a test method for determination of the smoke density due to pyroliticdecomposition of solid materials and composite materials of up to 25 mm in thickness under the influence ofradiant heat only or with simultaneous flame application.The test results enable a comparison of the smoke production of different materials or material configurationsunder the conditions specified in this standard.NOTE 1 The smoke gas density is determined according to the specific environmental and test conditions defined in EN2824 and this standard. No studies have been made up to now to determine whether the results can be transferred todiffering conditions, particularly to actual fire conditions.NOTE 2 The burning behaviour - and consequently the smoke density - of aerospace materials are not only influencedby the type of material but also to a large extent by the configuration, the specific surface and mass, the combination withother materials, the means of joining as well as the processing technique.