標準號：BS EN ISO 1825-2011
中文標準名稱：飛機地面加油和泄油用橡膠軟管和軟管組件.規格
英文標準名稱：Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
標準類型：V56
發布日期：2011/5/31 12:00:00
實施日期：2011/5/31 12:00:00
中國標準分類號：V56
國際標準分類號：49.100;83.140.40
引用標準：ISO 37;ISO 188;ISO 1382;ISO 1402;ISO 1817-2005;ISO 2230;ISO 4649-2002;ISO 4671;ISO 4672-1997;ISO 6246;ISO 7326;ISO 7989-1;ISO 7989-2;ISO 8031;ISO 8033;ISO 8330
適用范圍：This International Standard specifies the dimensions and construction of, and requirements for, four types ofhose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft.All four types are designed fora) use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume;b) operation within the temperature range of ?30 °C to +65 °C and such that they will be undamaged byclimatic conditions of ?40 °C to +70 °C when stored in static conditions;c) operation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which thehose can be subjected to in service.NOTE 1 Type C hoses are intended for general pressure applications on all vehicles used for plane fuelling. They canalso be used for vehicle/rail car loading and discharge where excessive vacuum does not occur.NOTE 2 Type F hoses can be used for plane delivery applications on vehicles that are also used for defuelling at highflow rates where type C hoses are not suitable.NOTE 3 Type E and F hoses can also be used for vehicle/rail car loading and discharge, for trailer to fueller transferand for elevation platform supply (riser) to provide greater kink resistance.