標準號：ISO/IEC 12862-2011
中文標準名稱：信息技術.120 mm(每面8,54 G字節)與80 mm(每面2,66 G字節)DVD雙層可記錄光盤(DL的DVD-R)
英文標準名稱：Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
標準類型：L64
發布日期：2011/5/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：L64
國際標準分類號：35.220.30
引用標準：ECMA-287
適用范圍：This International Standard specifies the mechanical, physical and optical characteristics of a 120 mm and an80 mm dual layer DVD recordable disk to enable the interchange of such disks. It specifies the quality of thepre-recorded, unrecorded and recorded signals, the format of the data, the format of the information zone, theformat of the unrecorded zone, and the recording method, thereby allowing for information interchange bymeans of such disks. This disk is identified as a DVD recordable disk for dual layer (DVD-R for DL).This International Standard specifies the following:- 120 mm and 80 mm nominal diameter disks that can be either single- or double-sided;- the conditions for conformance;- the environments in which the disk is to be operated and stored;- the mechanical and physical characteristics of the disk, so as to provide mechanical interchange betweendata processing systems;- the format of the pre-recorded information on an unrecorded disk, including the physical disposition of thetracks and sectors, the error correcting codes and the coding method used;- the format of the data and the recorded information on the disk, including the physical disposition of thetracks and sectors, the error correcting codes and the coding method used;- the characteristics of the signals from pre-recorded and unrecorded areas on the disk, enabling dataprocessing systems to read the pre-recorded information and to write to the disks;- the characteristics of the signals recorded on the disk, enabling data processing systems to read the datafrom the disk.This International Standard provides for interchange of disks between disk drives. Together with a standardfor volume and file structure, it provides for full data interchange between data processing systems.