標準號：BS EN 50130-4-2011
中文標準名稱：報警系統.電磁兼容性.產品類標準.對消防,入侵,攔截,閉路電視,門禁和社會報警系統部件的抗干擾度要求
英文標準名稱：Alarm systems. Electromagnetic compatibility. Product family standard. Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems
標準類型：A91
發布日期：2011/8/31 12:00:00
實施日期：2011/8/31 12:00:00
中國標準分類號：A91
國際標準分類號：13.220.20;13.310;13.320;33.100.20
引用標準：EN 60068-1-1994;EN 61000-4-2-2009;EN 61000-4-3-2006;EN 61000-4-4-2004;EN 61000-4-5-2006;EN 61000-4-6-2009;EN 61000-4-11-2004;EN 61000-4-20-2010;ETSI EN 301 489
適用范圍：This EMC product-family standard, for immunity requirements, applies to the components of thefollowing alarm systems, intended for use in and around buildings in residential, commercial, lightindustrial and industrial environments:– access control systems, for security applications;– alarm transmission systems 1);– CCTV systems, for security applications;– fire detection and fire alarm systems;– hold-up alarm systems;– intruder alarm systems;– social alarm systems;The tests and severities to be used are the same for indoor and outdoor applications of fixed, movableand portable equipment.The levels do not cover extreme cases, which may occur in any location, but with an extremely lowprobability of occurrence, or in special locations close to powerful emitters (e.g. radar transmitters).Equipment within the scope of this standard should be designed in order to operate satisfactorily in theenvironmental electromagnetic conditions of residential, commercial, light industrial and industrialenvironments. This implies particularly that it should be able to operate correctly within the conditionsfixed by the electromagnetic compatibility levels for the various disturbances on the low voltage publicsupply system as defined by EN 61000-2-2. The immunity tests in this standard only concern the mostcritical disturbance phenomena.For equipment using radio signalling, mains signalling or with connections to the public telephonesystem, additional requirements, from other standards specific to these signalling media, might apply.This standard does not specify basic safety requirements, such as protection against electrical shocks,unsafe operation, insulation coordination and related dielectric tests.This standard does not cover EMC emission requirements. These are covered by other appropriatestandards.