標準號：BS EN 61308-2006
中文標準名稱：高頻電介質加熱裝置.功率輸出的測定用試驗方法
英文標準名稱：High-frequency dielectric heating installations - Test methods for the determination of power output
標準類型：K61
發布日期：2006/7/31 12:00:00
實施日期：2006/7/31 12:00:00
中國標準分類號：K61
國際標準分類號：25.180.10
引用標準：IEC 60050-841-2004;IEC 60519-9
適用范圍：This International Standard is applicable to industrial high-frequency dielectric heatinginstallations used for the purpose of thermal applications such as melting, drying, welding,insect extermination, and gluing of partially conductive or non-conductive materials such asplastics, wood, rubber, textiles, glass, ceramic, paper, bamboo or foodstuffs, in both normal andprotective atmospheres, using, for example, inert gases or vacuum.This standard relates to high-frequency dielectric heating installations with nominal dielectricheating frequency in the range from 1 MHz to 300 MHz with rated useful output power greaterthan 50 W.The main purpose of this standard is to assist in compliance with the requirements set out in 6.4of IEC 60519-9 when testing electroheating power sources. It is not primarily intended as ameans of representing a potential high-frequency heating application for the requirement of theuser. Due to the large variety of dielectric heating applications, any output power value obtainedas a result of these tests should not always be taken as representing the power that can bedissipated in a particular dielectric heating installation, but, in certain instances, the outputpower value could be used as an indication of performance.The power required to heat a charge is dependent, for example, on the type of material heated,the temperature of heating and ambient moisture and on the construction of the electrodesystem.This standard relates to equipment normally operating under continuous rated conditions.