欧洲处破女www人鲁,亚洲无玛,国产bbaaaaa片,三年片在线观看免费播放大全电影国语版

百檢網首頁 我的訂單 400-101-7153

BS EN 14615-2005 郵政服務.數字郵政標記.設備、安全和設計

作者:百檢網 時間:2021-07-20

標準號:BS EN 14615-2005
中文標準名稱:郵政服務.數字郵政標記.設備、安全和設計
英文標準名稱:Postal services - Digital postage marks - Applications, security and design
標準類型:M80
發布日期:2005/2/18 12:00:00
實施日期:2005/2/18 12:00:00
中國標準分類號:M80
國際標準分類號:03.240
適用范圍:This document specifies a recommended procedure for the development of specifications for applications of digital postage marks (DPMs) - i.e. applications linked to the use of digital printing and image data capture technologies in the postal industry, most particularly for the evidencing of postage accounting and/or payment. It is not intended to prescribe or to recommend any particular architecture or design for such applications, only to specify the process through which such an architecture or design should be developed. NOTE 1 For this reason, the standard includes both normative and informative content. Clauses 1 to 5 and Annex A are normative, whilst the remaining annexes are informative. Non-normative (informative) clauses are indicated as such in the heading. The process described is based on a cyclic model, involving business planning; systems analysis; security analysis and detailed DPM design. The defined process is a recommended one only and DPM applications designers are not obligated to follow it. However, its use is intended to ensure both that all relevant aspects are taken into account in the design process and that the resulting specifications have a degree of commonality of structure which make them comparable with similar specifications produced by other parties. It is hoped that this will make them more easily intelligible, and less open to ambiguity, for implementers. It is assumed that users of the standard are familiar with normal processes involved in the design of computer-based applications and the standard therefore limits itself to aspects which are specific to DPM applications design. In particular, the document covers only requirements and considerations relating to applications that use digital postage marks, on individual postal items, as a means of communicating data (messages). The clause on design covers only the design of the digital postage marks themselves. It does not cover other aspects of design, including the possible use of other messages, transported by other means (e.g. statements of mailing), to provide for the communication of additional data, even though these might be just as important. The standard assumes, but does not require, that it is desired to implement digital postage marks which conform to UPU standards S27, S28 and S25 (see Bibliography) and provides a guide to the use of these standards. However, many of the guidelines, recommendations and checklists would apply equally to the design of DPM applications using digital postage marks based on symbologies other than those supported by S28, or requiring data which cannot be accommodated within S25-defined data constructs. NOTE 2 Though S28 [7] applies only to representation using two-dimensional symbologies and restricts its scope to two of these: Data Matrix and PDF417, its extension to other symbologies, including linear barcodes and OCR representation of data, is open to consideration. Users who find that their requirements cannot be met within the defined constraints are therefore encouraged to contact the Secretariat of the UPU Standards Board, with a view to exploring possible extension of the standard. NOTE 3 Though S25 [5] defines an initial set of data constructs, it is intended to extend this set on an as-needed basis. Users who find that their requirements cannot be met by existing data definitions are therefore encouraged to contact the Secretariat of the UPU Standards Board, with a view to extension of the standard.

相關標準

《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《SJ/T 11607-2016》指紋識別設備通用規范SJ/T 11607-2016
《GB/T 18284-2000》快速響應矩陣碼 /GB/T 18284-2000
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。

百檢能給您帶來哪些改變?

1、檢測行業全覆蓋,滿足不同的檢測;

2、實驗室全覆蓋,就近分配本地化檢測;

3、工程師一對一服務,讓檢測更精準;

4、免費初檢,初檢不收取檢測費用;

5、自助下單 快遞免費上門取樣;

6、周期短,費用低,服務周到;

7、擁有CMA、CNAS、CAL等權威資質;

8、檢測報告權威有效、中國通用;

客戶案例展示

  • 上海朗波王服飾有限公司
  • 浙江圣達生物藥業股份有限公司
  • 天津市長慶電子科技有限公司
  • 桑德斯微電子器件(南京)有限公司
  • 上海嘉疊貿易有限公司
  • 上海紐特絲紡織品有限公司
  • 無錫露米婭紡織有限公司
  • 東方電氣風電(涼山)有限公司
  • 寧波圖米文具用品有限公司
  • 江蘇力之創特種裝備制造有限公司

相關資訊

暫無相關資訊

最新資訊

百檢網
主站蜘蛛池模板: 康马县| 临汾市| 拉萨市| 句容市| 苗栗县| 龙门县| 贵德县| 松原市| 广元市| 分宜县| 伊宁县| 徐水县| 辉县市| 阆中市| 镇坪县| 寿阳县| 扎兰屯市| 大田县| 靖江市| 乌拉特前旗| 壤塘县| 大埔区| 北辰区| 行唐县| 蓬安县| 浦城县| 霍山县| 磴口县| 二手房| 札达县| 会东县| 二连浩特市| 屯留县| 天柱县| 祁阳县| 安陆市| 聊城市| 闽侯县| 高雄市| 阿克陶县| 澜沧|