標準號：BS EN 15058-2006
中文標準名稱：固定源輻射.一氧化碳質量濃度的測定(CO).參照法:非分散紅外光譜法
英文標準名稱：Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: non-dispersive infrared spectrometry
標準類型：Z60
發布日期：2006/6/30 12:00:00
實施日期：2006/6/30 12:00:00
中國標準分類號：Z60
國際標準分類號：13.040.40
引用標準：ENV 13005;CEN/TS 14793;EN ISO 14956;ISO 5725-2;ISO 5725-6-1994
適用范圍：This European Standard specifies the Standard Reference Method (SRM) for sampling, and determining carbonmonoxide content in ducts and stacks emitting to atmosphere. It describes the Non Dispersive Infra-Red(NDIR) analytical technique, including the sampling system and sample gas conditioning system, to determineCO in flue gases. This European Standard is the reference method for periodic monitoring and for calibrationor control of Automatic Measuring Systems (AMS) permanently installed on a stack, for regulatory purposes orother purposes. To be used as the SRM, it is necessary to demonstrate that the performance characteristicsof the method are lower than the performance criteria defined in this European standard and that the overalluncertainty of the method is less than ± 6 % relative at the daily Emission Limit Value (ELV).NOTE When the NDIR method is used as an AMS, refer to EN 14181 and other relevant standards provided byCEN TC 264.It is necessary for anybody who would like to use an Alternative Method instead of this Standard ReferenceMethod to work out the demonstration of the equivalence according to the Technical Specification TS 14793,providing that his capability to carry out this demonstration is officially recognised by his national accreditationbody or law.This Standard Reference Method has been evaluated during field tests on waste incineration, co-incinerationinstallations and large combustion plants. It has been validated for CO concentrations with sampling periodsof 30 min in the range of 0 mg/m3 to 400 mg/m3 for large combustion plants and 0 mg/m3 – 740 mg/m3 forwaste and co-incineration. For waste incineration plants, Council Directive 2000/76/EC lays down emissionvalues which are expressed in mg/m3, on dry basis at a specified value of O2 and at reference conditions of273 K and 101,3 kPa.