標準號：DIN EN 13035-2-2008
中文標準名稱：平面玻璃的制造、處理和加工用機械和設備.安全要求.第2部分:工廠外的存儲、搬運和運輸設備
英文標準名稱：Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory; English version of DIN EN 13035-2:2008-06
標準類型：Q93
發布日期：1999/12/31 12:00:00
實施日期：2008/10/1 12:00:00
中國標準分類號：Q93
國際標準分類號：81.100
引用標準：EN 981-1996;EN 983-1996;EN 999-1998;EN 1037-1995;EN 1088-1995;EN 12195-1-2003;EN 13035-1-2007;EN 13155-2003;EN 60204-1-2006;EN ISO 11201-1995;EN ISO 11202-1995;EN ISO 12100-1-2003;EN ISO 12100-2-2003;EN ISO 13850-2006;EN ISO 14122-1-2001;EN ISO 14122-2-20
適用范圍：1.1 This standard contains the requirements for safety for the design and installation of equipment intendedfor the storage (as defined in 3.2.1), handling (as defined in 3.2.2) and transportation (as defined in 3.2.3) offlat glass outside the factory (as defined in 3.1.1) and including stillages, pallets, frails fixed to vehicles, in-loader vehicles, specific glass-securing devices, stanchions and vacuum-lifting devices which are used forroad transport and on building sites. 1.2 Specific hazards due to the use inside the factory are dealt with in EN 13035-1. 1.3 This standard deals only with the devices which are directly in contact with the glass. This standarddoes not apply to manual handling equipment such as carrying straps and vacuum pads. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact withthe glass. This European Standard does not apply to equipment for the transport by other ways than on roade.g. by ship or train, and the transportation of glazed windows/frames. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipmentfor the storage, handling and transportation of fiat glass, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass outside the factory, which is manufactured before the date of its publication as EN.