欧洲处破女www人鲁,亚洲无玛,国产bbaaaaa片,三年片在线观看免费播放大全电影国语版

百檢網首頁 我的訂單 400-101-7153

ISO 16003-2008 用氣體的滅火設備部件.要求和試驗方法.容器閥組件及其激勵器、選擇閥及其激勵器、噴嘴、柔性和剛性連接器及止回閥和非止回閥

作者:百檢網 時間:2021-07-20

標準號:ISO 16003-2008
中文標準名稱:用氣體的滅火設備部件.要求和試驗方法.容器閥組件及其激勵器、選擇閥及其激勵器、噴嘴、柔性和剛性連接器及止回閥和非止回閥
英文標準名稱:Components for fire-extinguishing systems using gas - Requirements and test methods - Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves
標準類型:C84
發布日期:2008/9/1 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:C84
國際標準分類號:13.220.10
引用標準:ISO 7-1;ISO 228-1;ISO 7005;ISO 14520-1-2006;IEC 60068-2-6;IEC 60730-2-14;ASTM B117
適用范圍:This International Standard specifies requirements and describes test methods for the following componentsused in gaseous fire-extinguishing systems: container valve assemblies, which include container valve,actuator and. if applicable, a diptube; selector valves and their actuators; agent distribution nozzles; flexibleconnectors; and check and non-return valves.Container valve assemblies are designed to control the extinguishant flow from the container to thedistribution pipe work. They are normally in the closed position. The automatic control device triggers theactuator and the valve opens. Where applicable, the requirements contained in the test methods also apply toseparate container valves.The design of the nozzles influences the area coverage, the height limitations, the discharge rate and the flowrate.This International Standard is applicable to check valves installed between container valve and manifold andnon-return valves installed in pilot lines, except those valves that are tested in combination with non-electricalcontrol devices. It is required that non-return and check valves allow the passage in the direction of flow andprevent flow in the reverse direction.NOTE For the purpose of this International Standard, the pressure in megapascals (bars) means gauge pressure,unless otherwise indicated.

相關標準

《ISO 16000-6:2011》室內空氣 第6部分:通過Tenax TA吸附劑、熱解吸以及使用質譜(MS)或質譜-火焰離子化檢測器(MS-FID)的氣相色譜主動取樣來測定室內 ISO 16000-6:2011 10
《ISO 16000-6:2011》室內空氣 第6部分:通過Tenax TA吸附劑、熱解吸以及使用質譜(MS)或質譜-火焰離子化檢測器(MS-FID)的氣相色譜主動取樣來測定室內空氣 ISO 16000-6:2011 9
《GB/T 38462-2020》紡織品 隔離衣用非織造布 GB/T 38462-2020
《GB/T 14233.1-2008》醫用輸液、輸血、注射器具檢驗方法 第1部分:化學分析方法 GB/T 14233.1-2008 9
《GB/T 1958-2017》產品幾何技術規范(GPS) 幾何公差 檢測與驗證 GB/T 1958-2017
《GB 38453-2019》防護服裝 隔熱服 GB 38453-2019
《GB 8368-2018》一次性使用輸液器 重力輸液式 GB 8368-2018
《GB 8368-2018》一次性使用輸液器 重力輸液式 GB 8368-2018
《GB/T 16175-2008》醫用有機硅材料生物學評價試驗方法 GB/T 16175-2008
《GB/T 16175-2008》醫用有機硅材料生物學評價試驗方法 GB/T 16175-2008
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。

百檢能給您帶來哪些改變?

1、檢測行業全覆蓋,滿足不同的檢測;

2、實驗室全覆蓋,就近分配本地化檢測;

3、工程師一對一服務,讓檢測更精準;

4、免費初檢,初檢不收取檢測費用;

5、自助下單 快遞免費上門取樣;

6、周期短,費用低,服務周到;

7、擁有CMA、CNAS、CAL等權威資質;

8、檢測報告權威有效、中國通用;

客戶案例展示

  • 上海朗波王服飾有限公司
  • 浙江圣達生物藥業股份有限公司
  • 天津市長慶電子科技有限公司
  • 桑德斯微電子器件(南京)有限公司
  • 上海嘉疊貿易有限公司
  • 上海紐特絲紡織品有限公司
  • 無錫露米婭紡織有限公司
  • 東方電氣風電(涼山)有限公司
  • 寧波圖米文具用品有限公司
  • 江蘇力之創特種裝備制造有限公司

相關商品

暫無相關商品

相關資訊

暫無相關資訊

最新資訊

百檢網
主站蜘蛛池模板: 雅江县| 明溪县| 苏尼特左旗| 铁力市| 屏山县| 阿拉善左旗| 吉水县| 龙岩市| 顺昌县| 偃师市| 苗栗县| 启东市| 永新县| 响水县| 文昌市| 泾川县| 丹寨县| 根河市| 花莲市| 正蓝旗| 镇远县| 台南县| 遵义市| 资中县| 弋阳县| 延边| 北海市| 广水市| 五原县| 云龙县| 蒙城县| 张家川| 嘉定区| 元朗区| 滨海县| 郑州市| 河池市| 前郭尔| 化德县| 六盘水市| 柳林县|