標準號：DIN EN ISO 8062-3-2008
中文標準名稱：產品幾何量技術規范(GPS).模型配件的尺寸和幾何公差.第3部分:鑄件的通用尺寸、幾何公差和機械加工公差
英文標準名稱：Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007); English version of DIN EN ISO 8062-3:2008
標準類型：A42
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：A42
國際標準分類號：17.040.30
引用標準：ISO 286-1-1988;ISO 1101-2004;ISO 1302-2002;ISO 5459;ISO 8062-1-2007;ISO/TS 8062-2;ISO 10135;ISO 10579-1993;ISO 14405
適用范圍：This part of ISO 8062 specifies general dimensional and geometrical tolerances, as well as machiningallowance grades, for castings as delivered to the purchaser in accordance with ISO 8062-2. It is applicablefor the tolerancing of dimensions and geometry, and required machining allowance of castings in all castmetals and their alloys produced by various casting manufacturing processes.This part of ISO 8062 applies to both general dimensional and general geometrical tolerances (referred to inor near the title block of the drawing), unless otherwise specified, and where specifically referred to on thedrawing by one of the references in Clause 9.The dimensional tolerances covered by this part of ISO 8062 are tolerances for linear dimensions.The geometrical tolerances covered by this part of ISO 8062 are:-- tolerances for straightness,-- flatness, roundness,-- parallelism,-- perpendicularity,-- symmetry, and-- coaxiality.This part of ISO 8062 can be used for the selection of tolerance values for individual indications.NOTE This part of ISO 8062 does not apply to 3D CAD models used without indicated dimensions.