標準號:BS ISO 16004-2006
中文標準名稱:飛機地面設備.乘客登機橋或運輸工具.與飛機艙門接口的要求
英文標準名稱:Aircraft ground equipment - Passenger boarding bridge or transfer vehicle - Requirements for interface with aircraft doors
標準類型:V56
發布日期:2006/2/24 12:00:00
實施日期:2006/2/24 12:00:00
中國標準分類號:V56
國際標準分類號:49.100
適用范圍:This International Standard specifies dimensional interface and unobstructed space requirements applicable to the aircraft mating section of either a) passenger boarding bridges, or b) passenger transfer vehicles used at airports for boarding and disembarkation of passengers on the types of civil transport aircraft listed below. These types of aircraft have a door sill height greater than 2,0 m (80 in) above the ground. Lower aircraft usually do not require such means of access, and have not been taken into account. Data was compiled and checked as to the exact location of such items on the most frequently used civil transport aircraft types (i.e. families of aircraft sub-types with the same fuselage design and the same general type designator, which potentially includes any future derivative aircraft with the same fuselage). These types include the following: — AIRBUS INDUSTRIE: A300 / A310 / A318 / A319 / A320 / A321 / A330 / A340 — BOEING COMMERCIAL AIRPLANE: B717 / B727 / B737 / B747 / B757 / B767 / B777 — LOCKHEED AIRCRAFT: L1011 — McDONNELL DOUGLAS: DC9/DC10/MD11 /MD80/MD90 It is not the intent of this International Standard to specify any requirements applicable to aircraft design. Future aircraft types with a new fuselage should meet the main deck passenger doors requirements for interface with passenger boarding bridges or passenger transfer vehicles of ISO 7718, which would ensure their compatibility with the aircraft mating section of passenger boarding bridges or passenger transfer vehicles meeting the requirements of this International Standard. NOTE Read this International Standard in conjunction with the documents indicated in Bibliography.
相關標準
《GB/T 1232.1-2016/ISO 289-1:2014》未硫化橡膠用圓盤剪切粘度計進行測定 第1部分:門尼粘度的測定 GB/T 1232.1-2016/ISO 289-1:2014
《ISO 1795-2017》天然、合成生膠取樣及制樣方法 ISO 1795-2017
《GB/T 528-2009》硫化橡膠或熱塑性橡膠拉伸應力應變性能的測定 GB/T 528-2009
《GB/T 528-2009》硫化橡膠或熱塑性橡膠拉伸應力應變性能的測定 GB/T 528-2009
《SH/T 1759-2007》用凝膠滲透色譜法測定溶液聚合物分子量分布 SH/T 1759-2007
《GB/T 32676-2016》鹵化異丁烯-異戊二烯橡膠(BIIR和CIIR)評價方法 GB/T 32676-2016
《GB/T 528-2009》硫化橡膠或熱塑性橡膠 拉伸應力應變性能的測定 GB/T 528-2009
《SH/T 1717-2008》異丁烯-異戊二烯橡膠(IIR)評價方法 SH/T 1717-2008
《GB/T 24131.2-2017》生橡膠 揮發分含量的測定 第二部分:帶紅外線干燥單元的自動分析儀加熱失重法 GB/T 24131.2-2017
《GB/T 16584-1996》生膠硫化特性的測定 GB/T 16584-1996
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;