標準號:ISO 17356-5-2006
中文標準名稱:道路車輛.嵌入式機動車裝置用開放式界面.第5部分:OSEK/VDX網絡管理(NM)
英文標準名稱:Road vehicles - Open interface for embedded automotive applications - Part 5: OSEK/VDX Network Management (NM)
標準類型:T36
發布日期:1999/12/31 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:T36
國際標準分類號:43.040.15
適用范圍:1.1 Embedding of the Network Management (NM)NM defines a set of services for node monitoring. Figure 1 shows how the NM is embedded into a system andthat the NM shall be adapted to specific requirements of the bus system used or to the resources of the nodes.NM consists of the following:-- interface to interact with the Application Programming Interface(API);-- algorithm for node monitoring;-- internal interfaces (NM COM, etc.);-- algorithm for transition into sleep mode; and-- NM protocol data unit (NMPDU).1.2 Adaptation to bus protocol specific requirementsAdaptation to bus protocol specific requirements consists of the following:-- CAN, VAN, J1850, K-BUS, D2B, etc.;-- error handling, e.g. bus-off handling in a CAN, transmission line error handling; and-- interpretation of the status information, e.g. overrun or error active/passive in a CAN.1.3 Adaptation to node resourcesAdaptation to node resources consists of the following:-- scaling of the NM as a requirement of the node; and-- application-specific usage of the NM services.1.4 Adaptation to hardware-specific requirementsThis consists of adaptation to a protocol circuit and a physical layer circuit, e.g. switching the bus hardware toone of the possible physically power save modes.1.5 Station management (system-specific algorithms)There are a variety of additional tasks involved in coordinating a network. These are not described inISO 17356, since they are system-dependent. Hence, these tasks are done by the application, e.g. by amodule called station management.1.6 Philosophy of node monitoringNode monitoring is used to inform the application about the nodes on the network. Thus, the application cancheck with the appropriate service if all stations required for operation are present on the network.
相關標準
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;