標準號：ISO 16000-10-2006
中文標準名稱：室內(nèi)空氣.第10部分:建筑產(chǎn)品和家具釋放揮發(fā)性有機化合物的測定.釋放試驗室法
英文標準名稱：Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method
標準類型：Z15
發(fā)布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Z15
國際標準分類號：13.040.20
適用范圍：This part of ISO 16000 specifies a general laboratory test method for determination of the area specificemission rate of volatile organic compounds (VOCs) from newly produced building products or furnishingunder defined climate conditions. The method can in principle also be applied to aged products. The emissiondata obtained can be used to calculate concentrations in a model room.According to the definition of an emission test cell, it is also possible to perform non-destructive emissionmeasurements on building products on-site in buildings. However, the procedure for such measurements isnot described in this part of ISO 16000.Sampling, transport and storage of materials to be tested, and preparation of test specimens are described inISO 16000-11. Air sampling and analytical methods for the determination of VOCs are described inISO 16000-6 and ISO 16017-1[20].An example of an emission test cell is described in Annex C of this part of ISO 16000.For the determination of formaldehyde emissions from wood-based panels, refer to EN 717-1:2004 [21] andISO 12460-1 [1]. However, this part of ISO 16000 is also applicable to wood-based panels and other buildingproducts in order to determine the emission rate of formaldehyde. The measurement procedure forformaldehyde is described in ISO 16000-3 [2].