標準號：BS EN 10225-2009
中文標準名稱：固定近海結構的可焊接結構鋼.交付技術條件
英文標準名稱：Weldable structural steels for fixed offshore structures - Technical delivery conditions
標準類型：H40
發布日期：2009/7/31 12:00:00
實施日期：2009/7/31 12:00:00
中國標準分類號：H40
國際標準分類號：77.140.10
引用標準：EN 473;EN 571-1;EN 895;EN 1011-1;EN 10002-1;EN 10020-2000;EN 10021-2006;EN 10024;EN 10025-1;EN 10025-3;EN 10025-4;EN 10025-6;EN 10027-1;EN 10027-2;EN 10029;EN 10034;EN 10045-1;EN 10052-1993;EN 10055;EN 10056-2;EN 10067;EN 10079-2007;EN 10160;EN 10163-2;EN
適用范圍：This European Standard specifies requirements for weldable structural steels to be used in the fabrication of fixed offshore structures in the form of plates up to and including 150 mm thick. It also specifies sections up to 63 mm thick except for sections delivered in the as-rolled condition which are permitted up to 25 mm thick only. Seamlesshollow sections up to and including 40 mm thick and high frequency electric resistance welded hollow sections up to and including 20 mm thick are specified. Greater thicknesses for sections and hollow sections may be agreed,provided the technical requirements of this European Standard are maintained.For plates the thickness limitations are:S355G2+N, S355G5+M, - up to and including 20 mmS355G3+N, S355G6+M - up to and including 40 mmS355G7+N, S355G8+N, S355G9+N, S355G10+N - up to and including 150 mmS355G7+M, S355G8+M, S355G9+M, S355G10+M - up to and including 100 mmS420G1+QT, S420G1+M, S420G2+QT, S420G2+M - up to and including 100 mmS460G1+QT, S460G1+M, S460G2+QT, S460G2+M - up to and including 100 mmThe standard is applicable to steels for offshore structures, designed to operate in the offshore sector but not to steels supplied for the fabrication of subsea pipelines, risers, process equipment, process piping, and other utilities. It is primarily applicable to the North Sea Sector, but may also be applicable in other areas provided thatdue consideration is given to local conditions e.g. temperature.In the case of hollow sections formed from plate with the seam fusion welded, this European standard covers only the requirements of the plate material.Minimum yield strengths up to 460 MPa are specified together with low temperature impact properties attemperatures down to –40 °C.This European standard applies to material supplied ex-mill or from merchant's stock.