標準號：BS ISO 2942-2004
中文標準名稱：液壓傳動.濾芯.結構完整性的驗證和**氣泡點的測定
英文標準名稱：Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point
標準類型：J20
發布日期：2004/12/7 12:00:00
實施日期：2004/12/7 12:00:00
中國標準分類號：J20
國際標準分類號：23.100.60
適用范圍：This International Standard specifies a bubble-point test method applicable to filter elements used in hydraulic fluid power systems. It can be used either to verify the fabrication integrity of a filter element (by checking the absence of bubbles) or to permit the localization of the largest pore of the filter element by determining the first bubble point. Verification of fabrication integrity defines the acceptability of the filter elements for further use or testing. The first bubble point is established through continuation of the fabrication integrity test. It is under no circumstances a functional characteristic of a filter element; in particular, it cannot be used for extrapolation to the concepts of filtration rating, efficiency or retention capacity and should be used for information only.