標準號：BS EN 60317-22-2004+A1-2010
中文標準名稱：特種繞組線規范.聚酰胺包敷的聚酯或聚酰胺酯漆包圓銅線,180級
英文標準名稱：Specifications for particular types of winding wires - Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
標準類型：K12
發布日期：2004/12/13 12:00:00
實施日期：2004/12/13 12:00:00
中國標準分類號：K12
國際標準分類號：29.060.10
適用范圍：This part of IEC 60317 specifies the requirements of enamelled round copper winding wire ofclass 180 with a dual coating. The underlying coating is based on polyester or polyesterimideresin, which may be modified providing it retains the chemical identity of the original resin andmeets all specified wire requirements. The superimposed coating is based on polyamide resin.Class 180 is a thermal class that requires a minimum temperature index of 180 and a heatshock temperature of at least 200 °C.The temperature in degrees Celsius corresponding to the temperature index is not necessarilythat at which it is recommended that the wire be operated and this will depend on manyfactors, including the type of equipment involved.The range of nominal conductor diameters covered by this standard is as follows:– grade 1: 0,050 mm up to and including 3,150 mm;– grade 2: 0,050 mm up to and including 5,000 mm;– grade 3: 0,250 mm up to and including 1,600 mm.The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1.