標準號：BS DD CEN/TS 1992-4-1-2009
中文標準名稱：混凝土用緊固件的設計.第4-1部分:一般要求
英文標準名稱：Design of fastenings for use in concrete - Part 4-1: General
標準類型：J13
發布日期：2009/6/30 12:00:00
實施日期：2009/6/30 12:00:00
中國標準分類號：J13
國際標準分類號：21.060.01;91.080.40
引用標準：EN 206-1;EN 1990-2002;EN 1992-1-1-2004;EN 1993-1-1-2005;EN 1993-1-8-2005;EN 1994-1-1-2004;EN 1998-1-2004;EN 10002-1;EN 10080;EN 10088-2;EN 10088-3;EN 12390-2;EN 12390-3;EN 12390-7;EN 12504-1;EN 13501-2;EN ISO 13918;ISO 273;ISO 898-1;ISO 898-2;ISO 1803-199
適用范圍：1.1.1 This CEN/TS provides a design method for fasteners for structural purposes, which are used totransmit actions to the concrete.Inserts embedded in precast concrete elements during production, under FPC conditions and with the duereinforcement, intended for use only during transient situations for lifting and handling, are covered by the CEN/TR “Design and Use of Inserts for Lifting and Handling Precast Concrete Elements”, by CEN TC 229.1.1.2 This CEN/TS is intended for applications in which the failure of fastenings will:1) result in collapse or partial collapse of the structure, or 2) cause risk to human life, or3) lead to significant economic loss.1.1.3 The support of the fixture may be either statically determinate or statically indeterminate, defined as multiple anchor use in some European Technical Approvals (ETAs). Each support may consist of one fastener or a group of fasteners.1.1.4 This CEN/TS is valid for applications which fall within the scope of the series EN 1992. Inapplications where special considerations apply, e.g. nuclear power plants or civil defence structures,modifications may be necessary.1.1.5 This CEN/TS does not cover the design of the fixture. The design of the fixture shall be carried out to comply with the appropriate Standards. Requirements for stiffness and ductility of the fixture are given in clauses 5 and 8.