標準號：DIN EN 88-2-2008
中文標準名稱：燃氣器具用壓力調節器和相關安全裝置.第2部分:入口壓力*大為5巴及以下的燃氣壓力調節器
英文標準名稱：Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; English version of DIN EN 88-2:2008-03
標準類型：Q82;J16
發布日期：1999/12/31 12:00:00
實施日期：2008/3/1 12:00:00
中國標準分類號：Q82;J16
國際標準分類號：23.060.40
引用標準：EN 88-1-2007;EN 549;EN 682;EN 13611-2007;EN 13787;EN 60534-1-2005;EN 60534-2-3;EN ISO 228-1;EN ISO 6708;ISO 7-1;ISO 3419
適用范圍：This European Standard specifies the safety, construction and performance requirements for pressureregulators (hereafter referred to as regulators) intended for use with gas burners and gas-burningappliances using fuel gases of the 15', 2nd and 3rd families. This European Standard covers typetesting only. It also provides additional information for the purchaser and user.This European Standard is applicable to regulators that may be tested independently of gas burnersand gas-burning appliances, which have a declared working pressure from above 500 mbar up to andincluding 5 bar.This European Standard is also applicable to regulators incorporating safety devices.NOTE 1 For safety accessories and pressure accessories, the requirements of EN 13611:2007, Annex F alsoapply.NOTE 2 Regulators conforming to EN 88-2 fulfil also the requirements of EN 88-1.Regulators intended to be used on pipe work installations for third family gases are also covered byEN 13785 and EN 13786.This European Standard is not applicable to:a) pressure regulators that are connected directly to mains pipe-work or to a container that maintains a standard distribution pressure;b) pressure regulators which use electrical auxiliary energy.