標準號：BS EN 777-3-2009
中文標準名稱：非家用多燃燒器的燃氣高架輻射管加熱器系統.第3部分:系統F安全
英文標準名稱：Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F — Safety
標準類型：Q83
發布日期：2009/4/30 12:00:00
實施日期：2009/4/30 12:00:00
中國標準分類號：Q83
國際標準分類號：91.140.40
引用標準：EN 88-1-2007;EN 126-2004;EN 161-2007;EN 257;EN 298-2003;EN 437-2003;EN 10226-1-2004;EN 10226-2-2005;EN 60335-1-2002;EN 60335-2-102-2006;EN 60529-1992;EN 60584-1-1995;EN 60584-2-1993;EN ISO 228-1-2003;EN ISO 3166-1-2006;EN ISO 6976-2005;ISO 7005-1-1992;ISO
適用范圍：This European Standard specifies the requirements and test methods for the construction, safety,classification and marking of non-domestic gas-fired overhead radiant tube heaters incorporated intoa multi-burner system (called system F and referred to in the body of the text as the “system”) witheach burner unit under the control of an automatic burner control system.This standard is applicable to Type B52x and Type B53x systems (see 4.3) intended for use in otherthan domestic dwellings, in which the supply of combustion air and/or the evacuation of the productsof combustion is achieved by mechanical means.This standard is not applicable to:a) systems designed for use in domestic dwellings;b) outdoor systems;c) systems of heat input in excess of 120 kW (based on the net calorific value of the appropriatereference test gas);d) systems having a draught diverter incorporated between the exhaust fan and the flue duct;e) systems having fully pre-mixed gas and air burners in which:1) either the gas and all the combustion air are brought together just before the level of thecombustion zone; or2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstreamof the combustion zone;f) systems that are designed for continuous condensation within the flue system under normaloperating conditions;g) systems having combustion products evacuation ducts that are non-metallic.This standard is applicable to systems which are intended to be type tested. It also includes requirementsconcerning the evaluation of conformity, including factory production control, but these requirements onlyapply to POCEDs and their associated terminals.NOTE Requirements for systems which are not intended to be type tested would need to be subject tofurther consideration.