標準號：BS EN 10152-2009
中文標準名稱：電鍍鋅冷軋鋼板產品的交貨技術條件
英文標準名稱：Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
標準類型：H46
發布日期：2009/3/31 12:00:00
實施日期：2009/3/31 12:00:00
中國標準分類號：H46
國際標準分類號：77.140.50
引用標準：EN 10002-1-2001;EN 10020-2000;EN 10021-2006;EN 10027-1;EN 10027-2;EN 10051;EN 10079-2007;EN 10131;EN 10204-2004;EN ISO 7438;ISO 10113;ISO 10275
適用范圍：This European Standard specifies requirements for continuously electrolytic zinc coated cold rolled flatproducts of low carbon steels suitable for cold forming according to Table 1 in rolled widths ≥ 600 mm andthicknesses from 0,35 mm up to and including 3 mm, delivered as strip (in coil form), sheet, slit strip or cutlengths obtained from slit strip or sheet.NOTE 1 This European Standard can also be applied to continuously electrolytic zinc coated flat products of:a) steels according to EN 10139 (cold rolled strip in rolled widths < 600 mm),b) steels normally characterized by minimum yield strength or minimum tensile strength values in addition to formabilityparameters, e. g.1) steels with high yield strength and improved formability according to EN 10268 (cold rolled flat products),2) multiphase steels (cold rolled or hot rolled) according to prEN 10338,3) steels for construction according to national or regional standards (see e. g. DIN 1623).NOTE 2 By agreement at the time of enquiry and order this European Standard can be applied to continuouslyelectrolytic zinc coated hot-rolled steel flat products (e.g. according to EN 10025-1 and -2, EN 10111, EN 10149-1 to EN10149-3, etc.).NOTE 3 As the mass of the zinc coating applied is relatively small, the material is not intended to withstand outsideexposure without further chemical treatment and painting.