標準號：ISO 6507-1-2005
中文標準名稱：金屬材料.維氏硬度試驗.第1部分:試驗方法
英文標準名稱：Metallic materials - Vickers hardness test - Part 1: Test method
標準類型：H22
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H22
國際標準分類號：77.040.10
適用范圍：This part of ISO 6507 specifies the Vickers hardness test method, for the three different ranges of test force for metallic materialsThe Vickers hardness test is specified in this part of ISO 6507 for lengths of indentation diagonals between0,020 mm and 1,400 mm.NOTE 1 For indentation diagonals less than 0,020 mm, the increase of the uncertainty has to be considered.NOTE 2 In general, decreasing the test force increases the scatter of results of the measurements. This is particularlytrue for low-force Vickers hardness tests and Vickers microhardness tests, where the principal limitation will arise in themeasurement of the diagonals of the indentation. For Vickers microhardness, the accuracy of determination of the meandiagonal length is unlikely to be better than ± 0,001 mm (see Bibliography [2]-[5]).