標準號:SAE J 434-2004
中文標準名稱:汽車球磨鑄鐵件(球鐵件)
英文標準名稱:Automotive Ductile (Nodular) Iron Castings
標準類型:T05
發布日期:2004/2/17 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:T05
國際標準分類號:43.040.01;77.080.10
適用范圍:This SAE Standard covers the minimum mechanical properties measured on separately cast test pieces of varying thickness and microstructural requirements for ductile iron castings used in automotive and allied industries. Castings may be specified int he as-cast or heat-treated condition. If castings are heat-treated, prior approval from the customer is required. The appendix provides general information on chemical composition, microstructure and casting mechanical properties, as well as other information for particular service conditions. In this standard SI units are primary and in-lb units are derived.
相關標準
《GB24613-2009》玩具涂料中有害物質限量
《EN71-11:2005》玩具安全—第11部分: 有機化合物—分析方法
《EN71-11:2005》玩具安全—第11部分: 有機化合物—分析方法
《EN71-11:2005》玩具安全—第11部分: 有機化合物—分析方法
《EN71-10:2005》玩具安全—第10部分: 有機化合物—樣品制備和萃取
《EN71-11:2005》玩具安全—第11部分: 有機化合物—分析方法
《EN71-10:2005》玩具安全—第10部分: 有機化合物—樣品制備和萃取
《EN71-10:2005》玩具安全—第10部分: 有機化合物—樣品制備和萃取
《GB24613-2009》玩具涂料中有害物質限量
《EN71-11:2005》玩具安全—第11部分: 有機化合物—分析方法
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;