標準號：ANSI C119.5-2009
中文標準名稱：絕緣刺穿連接器系統,額定電壓小于等于600 V(低壓高空捆扎電纜與絕緣和非絕緣線路導線)
英文標準名稱：Insulation Piercing Connector Systems, rated 600 volts or less (low voltage aerial bundled cables and insulated and non-insulated line wires)
標準類型：L23
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：L23
國際標準分類號：29.120.20
適用范圍：This standard covers insulation piercing connectors used for making electrical connections between insulated, insulated-to-bare, and bare-to-bare conductors rated 600 V or less and 90°C (low voltage aerial bundled cables and bare and insulated line wires) on overhead distribution lines for electric utilities. Underground insulation piercing connector systems rated at 600 V are covered by ANSI C119.1. Since cable and insulation types exist in very different types and configurations, insulation piercing connectors can not be designed for the full range of cable and insulation possibilities (cable cross-section and material, insulation material and thickness). The manufacturer is to indicate the cable and insulation types the connector is designed for, and conformity to this standard shall be established by testing with these cable and insulation types. This standard establishes the electrical, mechanical and environmental test requirements for electrical insulation piercing connectors. This standard is not intended to recommend operating conditions or temperatures.