標準號：DIN EN 15377-3-2007
中文標準名稱：建筑物供暖系統.內部水基表面加熱和冷卻系統的設計.第3部分:再生能源的使用優化
英文標準名稱：Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources; English version of DIN EN 15377-3:2007-12
標準類型：P46
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：P46
國際標準分類號：91.140.10;91.140.30
引用標準：EN 15251;EN 15255;EN 15265;prEN 15377-1-2005;prEN 15377-2
適用范圍：This document is applicable to water based surface heating and cooling systems in residential, commercialand industrial buildings.The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps.The methods do not apply to heated or chilled ceiling panels or beams.This standard is part 3 of a series of standards:-- Part 1: Determination of the design heating and cooling capacity;-- Part 2: Design, dimensioning and installation;-- Part 3:Optimizing for use of renewable energy sources.The aim of the present standard is to give a guide for the design to promote the use of renewable energysources and to provide a method for the use of Thermo-Active-Building-Systems (TABS).The method allows calculation of peak cooling capacity of a thermo-active system, based on heat gains (solar,internal loads, ventilation).This method also allows calculation of the energy demand on the water side (system) to be used for sizing ofthe cooling system, e.g. chiller, fluid flow rate.Steady state heating capacity is calculated according to method B or E of prEN 15377-1 (part 1 of this seriesof standards).