標準號：BS EN 10253-2-2007
中文標準名稱：對接焊管道接頭.帶專門檢驗要求的非合金和鐵素體合金鋼
英文標準名稱：Butt-welding pipe fittings - Non alloy and ferritic alloy steels with specific inspection requirements
標準類型：H40;J15
發布日期：2007/11/30 12:00:00
實施日期：2007/11/30 12:00:00
中國標準分類號：H40;J15
國際標準分類號：23.040.40;77.140.45
引用標準：EN 287-1;EN 910;EN 1418;EN 10002–1;EN 10002–5;EN 10020-2000;EN 10021-2006;EN 10027-1;EN 10027-2;EN 10028-2;EN 10028-3;EN 10028-4;EN 10045–1;EN 10052-1993;EN 10168;EN 10204;EN 10217-1;EN 10217-2;EN 10217-3;EN 10217-4;EN 10217-5;EN 10217-6;EN 10246-10;EN 10
適用范圍：This Part of EN 10253 specifies the technical delivery requirements for seamless and welded butt-weldingfittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of carbon and alloysteel which are intended for pressure purposes at room temperature, at low temperature or at elevatedtemperatures, and for the transmission and distribution of fluids and gases.It specifies:- type of fittings ;- type A : Butt-welding fittings with reduced pressure factor ;- type B : Butt-welding fittings for use at full service pressure ;- steel grades ;- mechanical properties ;- dimensions and tolerances ;- requirements for inspection and testing ;- inspection documents ;- marking ;- protection and packaging.NOTE In the case of a harmonised supporting standard for materials, presumption of conformity to the ESRs is limitedto technical data of materials in the standard and does not presume adequacy of the material to a specific item ofequipment. Consequently it is essential that the technical data stated in the material standard be assessed against thedesign requirements of this specific item of equipment to verify that the ESRs of the PED are satisfied.