標準號：ANSI/ASME B107.58-2007
中文標準名稱：鉚錘,敲除水垢用錘和錫工用小錘.安全性要求
英文標準名稱：Riveting, Scaling, and Tinners’ Setting Hammers – Safety Requirements
標準類型：J47
發(fā)布日期：2007/11/7 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J47
國際標準分類號：25.140.30
適用范圍：This Standard provides performance and safety requirements for riveting, scaling, and tinner's setting hammers that are used in specific applications. (a) Riveting hammers: Intended specifically for driving, spreading, and setting unhardened rivets in hardened materials (also called tinner's or machinist's riveting hammers). (b) Scaling hammers: Intended specifically for removing scale, paint, welding flux, rust, or other similar flaking material from the surface of unhardened metal (also called chipping hammers). (c)Tinner's setting hammers: Intended specifically for closing, forming, and peening sheet metal (also called peening hammers). This Standard is also intended to serve as a guide for the development of manuals and posters and for training personnel to work safely. This Standard may be used as a guide by state authorities or other regulatory bodies in the formulation of laws or regulations. It is also intended for the voluntary use by establishments that use or manufacture the tools covered. The methods employed to ensure compliance with this Standard shall be determined by the proper regulatory or administrative authority.